Gradle tips and recipes

Gradle and the Android plugin for Gradle provide a flexible way to compile, build, and package your Android app or library. This page collects some useful tips and configurations to help you get the most out of each build. If you want to learn about ways to make your builds faster, read Optimize Your Build Speed.

If you are new to Gradle, learn the basics by reading Configure Your Build. You can also inspect the Android plugin's DSL reference documentation to learn more about the properties used in this page.

Manage projects and sources

Here are some configurations to manage your project's modules and their sources. To learn more about creating and managing projects and modules, read the Projects Overview.

Change default source set configurations

You can use the sourceSets block in the module-level build.gradle file to change where Gradle looks to gather files for each component of a source set.

Groovy

android {
  ...
  sourceSets {
    // Encapsulates configurations for the main source set.
    main {
      // Changes the directory for Java sources. The default directory is
      // 'src/main/java'.
      java.srcDirs = ['other/java']

      // When you list multiple directories, Gradle uses all of them to collect
      // sources. You should avoid specifying a directory which is a parent to one
      // or more other directories you specify.
      res.srcDirs = ['other/res1', 'other/res2']

      // For each source set, you can specify only one Android manifest.
      // The following points Gradle to a different manifest for this source set.
      manifest.srcFile 'other/AndroidManifest.xml'
      ...
    }

    // Create additional blocks to configure other source sets.
    androidTest {

      // If all the files for a source set are located under a single root
      // directory, you can specify that directory using the setRoot property.
      // When gathering sources for the source set, Gradle looks only in locations
      // relative to the root directory you specify. For example, after applying
      // the configuration below for the androidTest source set, Gradle looks for
      // Java sources only in the src/tests/java/ directory.
      setRoot 'src/tests'
      ...
    }
  }
}
...

Kotlin

android {
  ...
  sourceSets {
    // Encapsulates configurations for the main source set.
    getByName("main") {
      // Changes the directory for Java sources. The default directory is
      // 'src/main/java'.
      java.setSrcDirs("other/java")

      // When you list multiple directories, Gradle uses all of them to collect
      // sources. You should avoid specifying a directory which is a parent to one
      // or more other directories you specify.
      res.setSrcDirs("other/res1", "other/res2")

      // For each source set, you can specify only one Android manifest.
      // The following points Gradle to a different manifest for this source set.
      manifest.srcFile("other/AndroidManifest.xml")
      ...
    }

    // Create additional blocks to configure other source sets.
    androidTest {

      // If all the files for a source set are located under a single root
      // directory, you can specify that directory using the setRoot property.
      // When gathering sources for the source set, Gradle looks only in locations
      // relative to the root directory you specify. For example, after applying
      // the configuration below for the androidTest source set, Gradle looks for
      // Java sources only in the src/tests/java/ directory.
      setRoot("src/tests")
      ...
    }
  }
}
...

Manage libraries and dependencies

Gradle provides a robust mechanism to manage dependencies, whether they're remote libraries or local library modules.

Target specific builds with dependency configurations

If you want a dependency for only a specific build variant source set or testing source set, capitalize the dependency configuration name and prefix it with the name of the build variant or testing source set.

Groovy

android {...}

// Creates Gradle dependency configurations to use in the dependencies block.
configurations {
  // For variants that combine a product flavor and build type, you need to
  // intitialize a placeholder for its dependency configuration.
  freeDebugRuntimeOnly{}
  ...
}

dependencies {
    // Adds an implementation dependency only to the "free" product flavor.
    freeImplementation 'com.google.firebase:firebase-ads:21.5.1'
    // Adds a runtimeOnly dependency only to the "freeDebug" build variant.
    freeDebugRuntimeOnly fileTree(dir: 'libs', include: ['*.jar'])
    // Adds a remote binary dependency only for local tests.
    testImplementation 'junit:junit:4.12'
    // Adds a remote binary dependency only for the instrumented test APK.
    androidTestImplementation 'com.android.support.test.espresso:espresso-core:3.6.1'
}

Kotlin

android {...}

dependencies {
    // Use ""() notation for custom flavors and build types
    // Adds an implementation dependency only to the "free" product flavor.
    "freeImplementation"("com.google.firebase:firebase-ads:21.5.1")
    // Adds a runtimeOnly dependency only to the "freeDebug" build variant.
    "freeDebugRuntimeOnly"(fileTree("dir" to "libs", "include" to "*.jar"))
    // Adds a remote binary dependency only for local tests.
    testImplementation("junit:junit:4.12")
    // Adds a remote binary dependency only for the instrumented test APK.
    androidTestImplementation("com.android.support.test.espresso:espresso-core:3.6.1")
}

Create different versions of your app

Gradle and the Android plugin allow you to create different versions of your app from a single module by configuring build variants.

Configure dynamic version codes

By default, when Gradle generates APKs for your project, each APK has the same version information, as specified in the module-level build.gradle file. Because the Google Play Store does not allow multiple APKs for the same app that all have the same version information, you need to ensure each APK has its own unique versionCode before you upload to the Play Store.

You can do this with custom build logic that assigns a different version code to each APK at build time. For example, when creating separate APKs for each ABI, automatic APK versioning looks something like this:

Groovy

android {
  ...
  defaultConfig {
    ...
    versionCode 4
  }
  splits {
    ...
  }
}

// Map for the version code that gives each ABI a value.
ext.abiCodes = ['armeabi-v7a':1, mips:2, x86:3]

// For per-density APKs, create a similar map like this:
// ext.densityCodes = ['hdpi': 1, 'xhdpi': 2, 'xxhdpi': 3, 'xxxhdpi': 4]

import com.android.build.OutputFile

// For each APK output variant, override versionCode with a combination of
// ext.abiCodes * 1000 + variant.versionCode. In this example, variant.versionCode
// is equal to defaultConfig.versionCode. If you configure product flavors that
// define their own versionCode, variant.versionCode uses that value instead.
android.applicationVariants.all { variant ->

  // Assigns a different version code for each output APK
  // other than the universal APK.
  variant.outputs.each { output ->

    // Stores the value of ext.abiCodes that is associated with the ABI for this variant.
    def baseAbiVersionCode =
            // Determines the ABI for this variant and returns the mapped value.
            project.ext.abiCodes.get(output.getFilter(OutputFile.ABI))

    // Because abiCodes.get() returns null for ABIs that are not mapped by ext.abiCodes,
    // the following code does not override the version code for universal APKs.
    // However, because we want universal APKs to have the lowest version code,
    // this outcome is desirable.
    if (baseAbiVersionCode != null) {

      // Assigns the new version code to versionCodeOverride, which changes the version code
      // for only the output APK, not for the variant itself. Skipping this step simply
      // causes Gradle to use the value of variant.versionCode for the APK.
      output.versionCodeOverride =
              baseAbiVersionCode * 1000 + variant.versionCode
    }
  }
}

Kotlin

android {
  ...
  defaultConfig {
    ...
    versionCode = 4
  }
  splits {
    ...
  }
}

// Map for the version code that gives each ABI a value.
val abiCodes = mapOf("armeabi-v7a" to 1, "mips" to 2, "x86" to 3)

// For per-density APKs, create a similar map like this:
// val densityCodes = mapOf("hdpi" to 1, "xhdpi" to 2, "xxhdpi" to 3, "xxxhdpi" to 4)

import com.android.build.api.variant.FilterConfiguration.FilterType.*

// For each APK output variant, override versionCode with a combination of
// abiCodes * 1000 + variant.versionCode. In this example, variant.versionCode
// is equal to defaultConfig.versionCode. If you configure product flavors that
// define their own versionCode, variant.versionCode uses that value instead.
androidComponents {
    onVariants { variant ->

        // Assigns a different version code for each output APK
        // other than the universal APK.
        variant.outputs.forEach { output ->
            val name = output.filters.find { it.filterType == ABI }?.identifier

            // Stores the value of abiCodes that is associated with the ABI for this variant.
            val baseAbiCode = abiCodes[name]
            // Because abiCodes.get() returns null for ABIs that are not mapped by ext.abiCodes,
            // the following code does not override the version code for universal APKs.
            // However, because we want universal APKs to have the lowest version code,
            // this outcome is desirable.
            if (baseAbiCode != null) {
                // Assigns the new version code to output.versionCode, which changes the version code
                // for only the output APK, not for the variant itself.
                output.versionCode.set(baseAbiCode * 1000 + (output.versionCode.get() ?: 0))
            }
        }
    }
}

Combine multiple product flavors

In some cases, you may want to combine configurations from multiple product flavors. To do this, the Android plugin for Gradle lets you to create groups of product flavors, called flavor dimensions.

The following code sample uses the flavorDimensions property to create a "mode" flavor dimension to group the "full" and "demo" product flavors, and an "api" flavor dimension to group product flavor configurations based on API level. Gradle then combines product flavors from the "mode" dimension with those of the "api" dimension.

Groovy

android {
  ...
  buildTypes {
    debug {...}
    release {...}
  }

  // Specifies the flavor dimensions you want to use. The order in which you
  // list each dimension determines its priority, from highest to lowest,
  // when Gradle merges variant sources and configurations. You must assign
  // each product flavor you configure to one of the flavor dimensions.
  flavorDimensions "api", "mode"

  productFlavors {
    demo {
      // Assigns this product flavor to the "mode" flavor dimension.
      dimension "mode"
      ...
    }

    full {
      dimension "mode"
      ...
    }

    // Configurations in the "api" product flavors override those in "mode"
    // flavors and the defaultConfig block. Gradle determines the priority
    // between flavor dimensions based on the order in which they appear next
    // to the flavorDimensions property above--the first dimension has a higher
    // priority than the second, and so on.
    minApi24 {
      dimension "api"
      minSdkVersion '24'
      // To ensure the target device receives the version of the app with
      // the highest compatible API level, assign version codes in increasing
      // value with API level. To learn more about assigning version codes to
      // support app updates and uploading to Google Play, read Multiple APK Support
      versionCode 30000 + android.defaultConfig.versionCode
      versionNameSuffix "-minApi24"
      ...
    }

    minApi23 {
      dimension "api"
      minSdkVersion '23'
      versionCode 20000  + android.defaultConfig.versionCode
      versionNameSuffix "-minApi23"
      ...
    }

    minApi21 {
      dimension "api"
      minSdkVersion '21'
      versionCode 10000  + android.defaultConfig.versionCode
      versionNameSuffix "-minApi21"
      ...
    }
  }
}
...

Kotlin

android {
  ...
  buildTypes {
    getByName("debug") {...}
    getByName("release") {...}
  }

  // Specifies the flavor dimensions you want to use. The order in which you
  // list each dimension determines its priority, from highest to lowest,
  // when Gradle merges variant sources and configurations. You must assign
  // each product flavor you configure to one of the flavor dimensions.
  flavorDimensions += listOf("api", "mode")

  productFlavors {
    create("demo") {
      // Assigns this product flavor to the "mode" flavor dimension.
      dimension = "mode"
      ...
    }

    create("full") {
      dimension = "mode"
      ...
    }

    // Configurations in the "api" product flavors override those in "mode"
    // flavors and the defaultConfig block. Gradle determines the priority
    // between flavor dimensions based on the order in which they appear next
    // to the flavorDimensions property above--the first dimension has a higher
    // priority than the second, and so on.
    create("minApi24") {
      dimension = "api"
      minSdkVersion(24)
      // To ensure the target device receives the version of the app with
      // the highest compatible API level, assign version codes in increasing
      // value with API level. To learn more about assigning version codes to
      // support app updates and uploading to Google Play, read Multiple APK Support
      versionCode = 30000 + android.defaultConfig.versionCode
      versionNameSuffix = "-minApi24"
      ...
    }

    create("minApi23") {
      dimension = "api"
      minSdkVersion(23)
      versionCode = 20000  + android.defaultConfig.versionCode
      versionNameSuffix = "-minApi23"
      ...
    }

    create("minApi21") {
      dimension = "api"
      minSdkVersion(21)
      versionCode = 10000  + android.defaultConfig.versionCode
      versionNameSuffix = "-minApi21"
      ...
    }
  }
}
...

Filter variants

You can filter build variants that you don't want using the variantFilter block in the module's build.gradle file. The following sample code tells Gradle to not build any variants that combine the "minApi21" and "demo" product flavors:

Groovy

android {
  ...
  buildTypes {...}

  flavorDimensions "api", "mode"
  productFlavors {
    demo {...}
    full {...}
    minApi24 {...}
    minApi23 {...}
    minApi21 {...}
  }

  variantFilter { variant ->
      def names = variant.flavors*.name
      // To check for a certain build type, use variant.buildType.name == "<buildType>"
      if (names.contains("minApi21") && names.contains("demo")) {
          // Gradle ignores any variants that satisfy the conditions above.
          setIgnore(true)
      }
  }
}
...

Kotlin

android {
  ...
  buildTypes {...}

  flavorDimensions "api", "mode"
  productFlavors {
    create("demo") {...}
    create("full") {...}
    create("minApi24") {...}
    create("minApi23") {...}
    create("minApi21") {...}
  }
}

androidComponents {
    beforeVariants { variantBuilder ->
        // To check for a certain build type, use variantBuilder.buildType == "<buildType>"
        if (variantBuilder.productFlavors.containsAll(listOf("api" to "minApi21", "mode" to "demo"))) {
            // Gradle ignores any variants that satisfy the conditions above.
            variantBuilder.enabled = false
        }
    }
}
...

Test Your App

To learn more about running local and integrated unit tests, read Test your app.

Configure lint options

You can configure certain lint options using the lintOptions block in your module-level build.gradle file. To learn more about using lint for your Android project, read Improve Your Code with Lint.

Groovy

android {
    ...
    lintOptions {
        // Turns off checks for the issue IDs you specify.
        disable 'TypographyFractions','TypographyQuotes'
        // Turns on checks for the issue IDs you specify. These checks are in
        // addition to the default lint checks.
        enable 'RtlHardcoded','RtlCompat', 'RtlEnabled'
        // To enable checks for only a subset of issue IDs and ignore all others,
        // list the issue IDs with the 'check' property instead. This property overrides
        // any issue IDs you enable or disable using the properties above.
        checkOnly 'NewApi', 'InlinedApi'
        // If set to true, turns off analysis progress reporting by lint.
        quiet true
        // if set to true (default), stops the build if errors are found.
        abortOnError false
        // if true, only report errors.
        ignoreWarnings true
    }
}
...

Kotlin

android {
    ...
    lintOptions {
        // Turns off checks for the issue IDs you specify.
        disable("TypographyFractions")
        disable("TypographyQuotes")
        // Turns on checks for the issue IDs you specify. These checks are in
        // addition to the default lint checks.
        enable("RtlHardcoded")
        enable("RtlCompat")
        enable("RtlEnabled")
        // To enable checks for only a subset of issue IDs and ignore all others,
        // list the issue IDs with the 'check' property instead. This property overrides
        // any issue IDs you enable or disable using the properties above.
        checkOnly("NewApi", "InlinedApi")
        // If set to true, turns off analysis progress reporting by lint.
        quiet = true
        // if set to true (default), stops the build if errors are found.
        abortOnError = false
        // if true, only report errors.
        ignoreWarnings = true
    }
}
...

Configure instrumentation manifest settings

When Gradle builds your test APK, it automatically generates the AndroidManifest.xml file and configures it with the <instrumentation> node. You can change some of the settings for this node by either creating another manifest file in the test source set or configuring your module-level build.gradle file, as shown in the following code sample.

Groovy

android {
  ...
  // Each product flavor you configure can override properties in the
  // defaultConfig block. To learn more, go to Configure Product Flavors.
  defaultConfig {
    ...
    // Specifies the application ID for the test APK.
    testApplicationId "com.test.foo"
    // Specifies the fully-qualified class name of the test instrumentation runner.
    testInstrumentationRunner "android.test.InstrumentationTestRunner"
    // If set to 'true', enables the instrumentation class to start and stop profiling.
    // If set to false (default), profiling occurs the entire time the instrumentation
    // class is running.
    testHandleProfiling true
    // If set to 'true', indicates that the Android system should run the instrumentation
    // class as a functional test. The default value is 'false'
    testFunctionalTest true
  }
}
...

Kotlin

android {
  ...
  // Each product flavor you configure can override properties in the
  // defaultConfig block. To learn more, go to Configure Product Flavors.
  defaultConfig {
    ...
    // Specifies the application ID for the test APK.
    testApplicationId = "com.test.foo"
    // Specifies the fully-qualified class name of the test instrumentation runner.
    testInstrumentationRunner = "android.test.InstrumentationTestRunner"
    // If set to 'true', enables the instrumentation class to start and stop profiling.
    // If set to false (default), profiling occurs the entire time the instrumentation
    // class is running.
    testHandleProfiling = true
    // If set to 'true', indicates that the Android system should run the instrumentation
    // class as a functional test. The default value is 'false'
    testFunctionalTest = true
  }
}
...

Change the test build type

By default, all tests run against the debug build type. You can change this to another build type by using the testBuildType property in your module-level build.gradle file. For example, if you want to run your tests against your "staging" build type, edit the file as shown in the following snippet.

Groovy

android {
    ...
    testBuildType "staging"
}

Kotlin

android {
    ...
    testBuildType "staging"
}

Configure Gradle test options

To specify options that change how Gradle runs all your tests, configure the testOptions block in the module-level build.gradle.

Groovy

android {
  ...
  // Encapsulates options for running tests.
  testOptions {
    // Changes the directory where Gradle saves test reports. By default, Gradle saves test reports
    // in the path_to_your_project/module_name/build/outputs/reports/ directory.
    // '$rootDir' sets the path relative to the root directory of the current project.
    reportDir "$rootDir/test-reports"
    // Changes the directory where Gradle saves test results. By default, Gradle saves test results
    // in the path_to_your_project/module_name/build/outputs/test-results/ directory.
    // '$rootDir' sets the path relative to the root directory of the current project.
    resultsDir "$rootDir/test-results"
  }
}

Kotlin

android {
  ...
  // Encapsulates options for running tests.
  testOptions {
    // Changes the directory where Gradle saves test reports. By default, Gradle saves test reports
    // in the path_to_your_project/module_name/build/outputs/reports/ directory.
    // '$rootDir' sets the path relative to the root directory of the current project.
    reportDir "$rootDir/test-reports"
    // Changes the directory where Gradle saves test results. By default, Gradle saves test results
    // in the path_to_your_project/module_name/build/outputs/test-results/ directory.
    // '$rootDir' sets the path relative to the root directory of the current project.
    resultsDir "$rootDir/test-results"
  }
}

To specify options for only local unit tests, configure the testOptions.unitTests block.

Groovy

android {
  ...
  testOptions {
    ...
    // Encapsulates options for local unit tests.
    unitTests {
      // By default, local unit tests throw an exception any time the code you are testing tries to access
      // Android platform APIs (unless you mock Android dependencies yourself or with a testing
      // framework like Mockito). However, you can enable the following property so that the test
      // returns either null or zero when accessing platform APIs, rather than throwing an exception.
      returnDefaultValues true

      // Encapsulates options for controlling how Gradle executes local unit tests. For a list
      // of all the options you can specify, read Gradle's reference documentation.
      all {
        // Sets JVM argument(s) for the test JVM(s).
        jvmArgs '-XX:MaxPermSize=256m'

        // You can also check the task name to apply options to only the tests you specify.
        if (it.name == 'testDebugUnitTest') {
          systemProperty 'debug', 'true'
        }
      }
    }
  }
}

Kotlin

android {
  ...
  testOptions {
    ...
    // Encapsulates options for local unit tests.
    unitTests {
      // By default, local unit tests throw an exception any time the code you are testing tries to access
      // Android platform APIs (unless you mock Android dependencies yourself or with a testing
      // framework like Mockito). However, you can enable the following property so that the test
      // returns either null or zero when accessing platform APIs, rather than throwing an exception.
      returnDefaultValues true

      // Encapsulates options for controlling how Gradle executes local unit tests. For a list
      // of all the options you can specify, read Gradle's reference documentation.
      all {
        // Sets JVM argument(s) for the test JVM(s).
        jvmArgs '-XX:MaxPermSize=256m'

        // You can also check the task name to apply options to only the tests you specify.
        if (it.name == 'testDebugUnitTest') {
          systemProperty 'debug', 'true'
        }
      }
    }
  }
}

Optimize your build

This section provides some configurations to help speed up your full and incremental builds. To learn more, read Optimize Your Build Speed.

Shrink your code

Android Studio uses R8, which consumes ProGuard rules files, to shrink your code. For new projects, Android Studio uses a default settings file (proguard-android.txt) from the Android SDK's tools/proguard/folder. For even more code shrinking, try the proguard-android-optimize.txt file that's in the same location.

Groovy

android {
  buildTypes {
    release {
      minifyEnabled true
      proguardFiles getDefaultProguardFile('proguard-android-optimize.txt'),
                                           'proguard-rules.pro'
    }
  }
  ...
}
...

Kotlin

android {
  buildTypes {
    release {
      minifyEnabled true
      proguardFiles getDefaultProguardFile('proguard-android-optimize.txt'),
                                           'proguard-rules.pro'
    }
  }
  ...
}
...

To add rules that are specific to each build variant, configure additional proguardFiles property for each flavor. For example, the following sample adds flavor2-rules.pro to "flavor2". Now the release version of "flavor2" uses all three rules files because those from the release block are also applied.

Groovy

android {
  ...
  buildTypes {
    release {
      minifyEnabled true
      proguardFiles getDefaultProguardFile('proguard-android.txt'),
             'proguard-rules.pro'
    }
  }
  productFlavors {
    flavor1 {
      ...
    }
    flavor2 {
      proguardFile 'flavor2-rules.pro'
    }
  }
}
...

Kotlin

android {
  ...
  buildTypes {
    release {
      minifyEnabled true
      proguardFiles getDefaultProguardFile('proguard-android.txt'),
             'proguard-rules.pro'
    }
  }
  productFlavors {
    flavor1 {
      ...
    }
    flavor2 {
      proguardFile 'flavor2-rules.pro'
    }
  }
}
...

Publish your app

To learn more about publishing your app to Google Play, read Publish Your App.

Sign your app

Although Android Studio provides a straighforward way to configure signing for release builds from the UI, you can manually configure the signingConfigs block in your module's build.gradle file:

Groovy

android {
  ...
  defaultConfig { ... }

  // Encapsulates signing configurations.
  signingConfigs {
    // Creates a signing configuration called "release".
    release {
      // Specifies the path to your keystore file.
      storeFile file("my-release-key.jks")
      // Specifies the password for your keystore.
      storePassword "password"
      // Specifies the identifying name for your key.
      keyAlias "my-alias"
      // Specifies the password for your key.
      keyPassword "password"
    }
  }
  buildTypes {
    release {
      // Adds the "release" signing configuration to the release build type.
      signingConfig signingConfigs.release
      ...
    }
  }
}
...

Kotlin

android {
  ...
  defaultConfig { ... }

  // Encapsulates signing configurations.
  signingConfigs {
    // Creates a signing configuration called "release".
    release {
      // Specifies the path to your keystore file.
      storeFile file("my-release-key.jks")
      // Specifies the password for your keystore.
      storePassword "password"
      // Specifies the identifying name for your key.
      keyAlias "my-alias"
      // Specifies the password for your key.
      keyPassword "password"
    }
  }
  buildTypes {
    release {
      // Adds the "release" signing configuration to the release build type.
      signingConfig signingConfigs.release
      ...
    }
  }
}
...

Remove private signing information from your project

By default, signing configurations are recorded in plain text to the module's build.gradle file. If you are working with a team or an open-source project, you can move this sensitive information out of the build files by proceeding as follows.

  1. Create a file named keystore.properties in the root directory of your project and include the following information:
    storePassword=myStorePassword
    keyPassword=myKeyPassword
    keyAlias=myKeyAlias
    storeFile=myStoreFileLocation
    
  2. In your build.gradle file, load the keystore.properties file as follows (this has to be before the android block):

    Groovy

    // Creates a variable called keystorePropertiesFile, and initializes it to the
    // keystore.properties file.
    def keystorePropertiesFile = rootProject.file("keystore.properties")
    
    // Initializes a new Properties() object called keystoreProperties.
    def keystoreProperties = new Properties()
    
    // Loads the keystore.properties file into the keystoreProperties object.
    keystoreProperties.load(new FileInputStream(keystorePropertiesFile))
    
    android {
      ...
    }
    ...
    

    Kotlin

    // Creates a variable called keystorePropertiesFile, and initializes it to the
    // keystore.properties file.
    def keystorePropertiesFile = rootProject.file("keystore.properties")
    
    // Initializes a new Properties() object called keystoreProperties.
    def keystoreProperties = new Properties()
    
    // Loads the keystore.properties file into the keystoreProperties object.
    keystoreProperties.load(new FileInputStream(keystorePropertiesFile))
    
    android {
      ...
    }
    ...
    
  3. Input the signing information stored in the keystoreProperties object:

    Groovy

    android {
      signingConfigs {
        config {
          keyAlias keystoreProperties['keyAlias']
          keyPassword keystoreProperties['keyPassword']
          storeFile file(keystoreProperties['storeFile'])
          storePassword keystoreProperties['storePassword']
        }
      }
      ...
    }
    ...
    

    Kotlin

    android {
      signingConfigs {
        config {
          keyAlias keystoreProperties['keyAlias']
          keyPassword keystoreProperties['keyPassword']
          storeFile file(keystoreProperties['storeFile'])
          storePassword keystoreProperties['storePassword']
        }
      }
      ...
    }
    ...
    
  4. Click Sync Now in the notification bar.

To learn more about app signing, read Sign Your App.

Simplify app development

The following tips help make developing your Android app easier.

Share custom fields and resource values with your app's code

At build time, Gradle generates the BuildConfig class so your app code can inspect information about the current build. You can also add custom fields to the BuildConfig class from your Gradle build configuration file using the buildConfigField() method and access those values in your app's runtime code. Likewise, you can add app resource values with resValue().

Groovy

android {
  ...
  buildTypes {
    release {
      // These values are defined only for the release build, which
      // is typically used for full builds and continuous builds.
      buildConfigField("String", "BUILD_TIME", "\"${minutesSinceEpoch}\"")
      resValue("string", "build_time", "${minutesSinceEpoch}")
      ...
    }
    debug {
      // Use static values for incremental builds to ensure that
      // resource files and BuildConfig aren't rebuilt with each run.
      // If these rebuild dynamically, they can interfere with
      // Apply Changes as well as Gradle UP-TO-DATE checks.
      buildConfigField("String", "BUILD_TIME", "\"0\"")
      resValue("string", "build_time", "0")
    }
  }
}
...

Kotlin

android {
  ...
  buildTypes {
    release {
      // These values are defined only for the release build, which
      // is typically used for full builds and continuous builds.
      buildConfigField("String", "BUILD_TIME", "\"${minutesSinceEpoch}\"")
      resValue("string", "build_time", "${minutesSinceEpoch}")
      ...
    }
    debug {
      // Use static values for incremental builds to ensure that
      // resource files and BuildConfig aren't rebuilt with each run.
      // If these rebuild dynamically, they can interfere with
      // Apply Changes as well as Gradle UP-TO-DATE checks.
      buildConfigField("String", "BUILD_TIME", "\"0\"")
      resValue("string", "build_time", "0")
    }
  }
}
...

In your app code, you can access the properties as follows:

Kotlin

...
Log.i(TAG, BuildConfig.BUILD_TIME)
Log.i(TAG, getString(R.string.build_time))

Java

...
Log.i(TAG, BuildConfig.BUILD_TIME);
Log.i(TAG, getString(R.string.build_time));

Share properties with the manifest

In some cases, you may need to declare the same property in both your manifest and your code (for example, when declaring authorities for a FileProvider). Rather than updating the same property in multiple locations to reflect a change, define a single property in your module's build.gradle file to have it available to both the manifest and your code, as shown in the following sample. To learn more, read Inject Build Variables into the Manifest.

Groovy

android {
  // For settings specific to a product flavor, configure these properties
  // for each flavor in the productFlavors block.
  defaultConfig {
    // Creates a property for the FileProvider authority.
    def filesAuthorityValue = applicationId + ".files"
    // Creates a placeholder property to use in the manifest.
    manifestPlaceholders =
      [filesAuthority: filesAuthorityValue]
      // Adds a new field for the authority to the BuildConfig class.
      buildConfigField("String",
                       "FILES_AUTHORITY",
                       "\"${filesAuthorityValue}\"")
  }
  ...
}
...

Kotlin

android {
  // For settings specific to a product flavor, configure these properties
  // for each flavor in the productFlavors block.
  defaultConfig {
    // Creates a property for the FileProvider authority.
    val filesAuthorityValue = applicationId + ".files"
    // Creates a placeholder property to use in the manifest.
    manifestPlaceholders["filesAuthority"] = filesAuthorityValue
      // Adds a new field for the authority to the BuildConfig class.
      buildConfigField("String",
                       "FILES_AUTHORITY",
                       "\"${filesAuthorityValue}\"")
  }
  ...
}
...

In your manifest, access the placeholder as follows:

<manifest>
  ...
  <application>
    ...
    <provider
      android:name="android.support.v4.content.FileProvider"
      android:authorities="${filesAuthority}"
      android:exported="false"
      android:grantUriPermissions="true">
      ...
    </provider>
  </application>
</manifest>

Accessing the FILES_AUTHORITY field in your app's code looks something like this:

Kotlin

...
val contentUri: Uri = FileProvider.getUriForFile(context, BuildConfig.FILES_AUTHORITY, myFile)

Java

...
Uri contentUri = FileProvider.getUriForFile(getContext(),
  BuildConfig.FILES_AUTHORITY,
  myFile);