This page allows you to examine the variables generated by the Edit Filter for an individual change.

Variables generated for this change

VariableValue
Name of the user account (user_name)
'68.34.141.145'
Page ID (page_id)
1054294
Page namespace (page_namespace)
0
Page title without namespace (page_title)
'Rifled breech loader'
Full page title (page_prefixedtitle)
'Rifled breech loader'
Action (action)
'edit'
Edit summary/reason (summary)
''
Whether or not the edit is marked as minor (no longer in use) (minor_edit)
false
Old page wikitext, before the edit (old_wikitext)
'{{Cannon}} A '''rifled breech loader''' (RBL) is an [[artillery]] piece which, unlike the smooth-bore [[cannon]] and [[rifled muzzle loader]] (RML) which preceded it, has [[rifling]] in the barrel and is loaded from the [[breech]] at the rear of the gun. The spin imparted by the gun's rifling gives projectiles directional stability and greater penetrating power. Loading from the rear of the gun leaves the crew less exposed to enemy fire, allows smaller gun emplacements or turrets, and allows a faster rate of fire. ==Overview== The major problem to be solved with breechloading artillery was obturation : the sealing of the breech after firing to ensure that none of the gases generated by the burning of the propellant (initially gunpowder) escaped rearwards through the breech. This was both a safety issue and one of gun performance : all the propellant gas was needed to accelerate the projectile along the barrel. The second problem was speed of operation : how to close the breech before firing and open it after firing as quickly as possible consistent with safety. Two solutions were developed more or less in parallel : The "screw breech" block and "sliding wedge" or "sliding block". At the time of development of the first modern breechloaders in the mid-1800s, gunpowder propellant charges for artillery were typically loaded in cloth bags, which combusted totally on firing. Hence, unlike with a metal rifle cartridge, the breech mechanism itself somehow needed to provide obturation. The early "screw" mechanisms for sealing the breech consisted of threaded blocks which were screwed tightly into the breech after loading, but the threads themselves were insufficient to provide a gas-tight seal. This was further complicated by the need to screw and unscrew the breech as quickly as possible : this was met by the "[[interrupted thread]]" breech block, where the block circumference was alternately threaded and left unthreaded at a slightly smaller diameter to allow the whole block to be fully inserted and rotated a fraction to lock it. Hence if the block circumference was divided into two sets of threads and gaps, the block only needed to be rotated ¼ turn to lock it instead of several turns. The tradeoff was that only ½ the block's circumference was threaded, reducing the security accordingly. The other possibility of sealing the breech was to enclose the propellant charge in a metal cartridge case which expanded on firing and hence sealed the breech, leaving the breech-block merely needing to lock the cartridge case in place. This was more easily accomplished by sliding the block in behind the cartridge case through a vertical or horizontal slot cut through the rear of the breech : the "sliding wedge" or "sliding block" breech. ==Early breechloaders== [[File:Oda_Nobunaga_swivel_breech_loading_gun.jpg|thumb|left|<center>A Japanese swivel breech-loading gun of the time of [[Oda Nobunaga]], 16th century. This gun is thought to have been founded in Portuguese [[Goa]], [[India]]. Caliber: 95mm, length: 2880mm</center>]] The very first cannon of the Middle Ages were breech loaded, with gunpowder and shot contained in pots dropped at the back of the barrel, but the poor seals made them dangerous, and they wore quickly and could not be scaled to larger weapons. Muzzle-loaders were then used until the 19th century. In 1837 [[Martin von Wahrendorff]] patented a breech-loader with a cylindrical breech plug secured by a horizontal wedge; it was adopted by Sweden in 1854. {{clearleft}} ==Armstrong screw breech== [[File:RBL 7 inch Armstrong breech diagram.jpg|thumb|left|Armstrong screw breech]] [[William George Armstrong|Armstrong]] introduced improved designs in the 1850s and 1860s ("[[Armstrong gun]]s" with his "Armstrong screw" breech) which involved loading the shell and propellant cartridge through the hollow breech screw, lowering a heavy block into a slot behind the powder chamber and screwing the breech screw tightly against the block to lock it in place. A degree of obturation was achieved via a cup on the face of the block being forced into a recessed ring on the chamber face. The system was in effect a vertical sliding block such as later used by Krupp in both horizontal and vertical form, with the crucial difference that Armstrong failed to make the progression to loading the powder charge in a metal cartridge, with the result that complete obturation was impossible : whatever obturation that was achieved relied on manual labour rather than the power of the gun's firing, and was hence both uncertain, based on an unsound principle and unsuited to large guns. Armstrong screw-breech guns were initially adopted by the British Army and Royal Navy, but concerns about limited armour penetration of the shells due to limited maximum velocity, safety concerns with the breech blocks blowing out of guns, and higher skill levels demanded of gunners led the British Government to revert to the rifled muzzle-loader in 1870. The Imperial Japanese Army used Armstrong cannon during the [[Boshin War]] to devastate the [[Aizu]] castle town and force its inhabitants to surrender quickly, and British Armstrong light field guns proved deadly against Chinese forces in the [[Second Opium War]]. However, the British Army and Navy preferred to revert to muzzle-loaders until larger high-powered breech-loaders with secure obturation systems that were relatively simple to operate were developed. ==Interrupted screw breech== [[File:Lahitolle canon 95mm 1875-1879 before 1923.jpg|thumb|right|<center>Lahitolle gun and interrupted screw breech</center>]] In the meantime the French persevered with trying to develop breechloaders which combined faster loading than muzzle-loaders, high power, safety and solved the problem of obturation : i.e. how to prevent escape of some propellant gas through the breech to the rear. The [[Lahitolle 95 mm cannon]] of 1875 with an [[interrupted screw]] breech met the first three requirements to a great extent and partially solved the obturation problem. ==de Bange system== [[File:Culasse systeme De Bange before 1923.jpg|thumb|left|<center>de Bange interrupted screw breech</center>]] Finally the [[Charles Ragon de Bange|de Bange]] system introduced in 1877 solved the obturation problem with an asbestos pad impregnated with grease which expanded and sealed the breech on firing. The de Bange system formed the obturation system for all subsequent screw breeches to the present day. Britain adopted the de Bange breech when it returned to breechloaders in the early 1880s after some initial experiments with the inferior "Armstrong cup" obturation system. ==Krupp sliding block== [[File:Krupp sliding block gun Philadelphia 1876.jpg|thumb|right|<center>Krupp horizontal sliding block (left side) breech on large gun exhibited at the Centennial Exhibition, Philadelphia, 1876</center>]] Krupp in Germany during this period (1870s - 1880s) in contrast adopted "Horizontal sliding block" breeches, rather than screw breeches, for all artillery calibres up to 16 inch naval guns. This was similar in some ways to the original "Armstrong screw" : the shell and powder cartridge were inserted through a hollow breech block into the gun bore, and a steel block was slid home into a horizontal slot cut through the breech to close the rear end of the breech. However, unlike Armstrong, Krupp loaded the powder propellant in a metal cartridge case much like a large rifle cartridge, which expanded against the chamber wall on firing and effectively sealed the breech. The sliding block, in both horizontal and vertical forms, and metal cartridge case continued to be the preferred German breech system until after World War II, and is still used by some modern artillery. ==Hotchkiss and Nordenfelt sliding-wedge quickfiring guns== From the mid-1880s Hotchkiss and Nordenfelt introduced 47-mm and 57-mm guns which loaded ammunition as a single cartridge with projectile, cartridge case and primer in a single unit as with modern rifle cartridges. The cartridge case sealed the breech on firing and a vertical sliding wedge (block) locked it in place. These new guns incorporated recoil control devices which facilitated consistency of aim, allowed single-motion loading and fired as soon as the cartridge was inserted and ejected it after firing : hence the name quick-firing. This set a new standard for artillery, and made firing cycles measured in seconds rather than minutes possible. ==Elswick coned interrupted screw== [[File:QF 6 inch gun coned breech screw.jpg|thumb|right|<center>Elswick coned interrupted screw breech of [[QF 6 inch /40 naval gun|QF 6-inch naval gun]]</center>]] Britain enthusiastically adopted the new quickfiring technology, using brass cartridge cases for all calibres up to 6 inches in the late 1880s and early 1890s. However, unlike Krupp and Hotchkiss, British-designed quickfiring ("QF" in British terminology, which became synonymous with charges in metal cartridge cases) continued to use screw breech blocks, but with their function merely to lock the cartridge in place rather than provide obturation. The powerful backward force generated by 6-inch QF guns still required a strongly-seated breech screw with as much thread as possible. However, a basic interrupted-thread screw sufficiently long enough to have enough thread to secure the cartridge on firing still required three separate motions to operate : rotate, withdraw, swing aside after firing, and repeated in reverse before firing. [[Elswick Ordnance Company]] (Armstrong's ordnance arm) developed a coned version of the interrupted-thread screw, with a decreasing rather than constant diameter towards the front. This eliminated the second "withdrawal" motion, with just two motions now necessary : rotate and swing aside. This proved short-lived, with Britain adopting charges in bags using the Welin stepped interrupted screw for all guns 5 inches and up within several years of it becoming available. ==Bofors ogival screw== [[File:Ogival screw.png|thumb|left|<center>Bofors ogival screw</center>]] Also in the early 1890s, Arent Silfversparre of [[Bofors]] invented an ogival screw breech, similar to the Armstrong model in the way it eliminated the need to withdraw the screw before swinging it to the side. Bofors continued to use this in medium artillery into the twentieth century. ==Welin stepped interrupted screw breech== {{main|Welin breech block}} [[File:USN 14 inch railway gun Mk II open breech 1919 LOC 12666.jpg|thumb|right|<center>Welin breech with 4 sets of 3 thread steps</center>]] Britain, France and the United States preferred screw breeches for most calibres, but the major drawback of the de Bange interrupted screw as first implemented was that only half of the circumference of the breech block could be threaded, and hence it needed to be fairly long to achieve safe locking of the breech, which required three separate motions to open after firing : rotate to unscrew, retract the screw and swing to the side. Loading required the 3 operations in reverse. This was hence termed a "three motion block" and was slow to operate. [[Axel Welin]] solved this problem in 1889-1890 with his stepped interrupted screw [[Welin breech block]]. This had threads in sets of steps of increasing diameter so that instead of only half of the screw being threaded, the fraction threaded was '''number of steps / (1 + number of steps)''' : i.e. if the block of a large gun had four steps of threads, 80% of the screw was threaded, allowing a much shorter screw and hence breech block. This allowed the block to be unscrewed and swung out in two motions : the "two motion interrupted screw" breech. Further improvements such as that of Smith-Asbury in 1916 allowed the whole action of unscrewing and swinging aside of the breech screw to be accomplished in a single continuous motion, resulting in the "single-motion interrupted screw breech" still in use today. ==Summary== These rapidly-improving breech systems and the powerful new guns they facilitated led to an [[arms race]] in [[fortification]] and [[ironclad]] warship design that lead to the [[battleship]] class of [[HMS Dreadnought]] and continued until the start of [[World War I]]. ==See also== *[[Armstrong Gun]] ==References== * Royal New Zealand Artillery Association, [http://riv.co.nz/rnza/hist/ord/breech.htm Breech Mechanisms] * W. L. Ruffell, [http://riv.co.nz/rnza/hist/gun/rifled13.htm The Gun - Rifled Ordnance Breech Mechanisms] * Willian F Fullam & Thomas C Hart, USN, [http://www.archive.org/details/textbookordnanc00acadgoog Text-Book of Ordnance and Gunnery. Chapter IV Breech Mechanisms] published by United States Naval Institute, Annapolis MD, 1905 ==External links== [[Category:Artillery by type]] [[ja:アームストロング砲]]'
New page wikitext, after the edit (new_wikitext)
'{{Cannon}} A '''rifled breech loader''' (RBL) is an [[artillery]] piece which, unlike the smooth-bore [[cannon]] and [[rifled muzzle loader]] (RML) which preceded it, has [[rifling]] in the barrel and is loaded from the [[breech]] at the rear of the gun. I LOVE YOU SO MUCH HALEY PLEASE GO BACK OUT WITH ME!!!!! The spin imparted by the gun's rifling gives projectiles directional stability and greater penetrating power. Loading from the rear of the gun leaves the crew less exposed to enemy fire, allows smaller gun emplacements or turrets, and allows a faster rate of fire. ==Overview== The major problem to be solved with breechloading artillery was obturation : the sealing of the breech after firing to ensure that none of the gases generated by the burning of the propellant (initially gunpowder) escaped rearwards through the breech. This was both a safety issue and one of gun performance : all the propellant gas was needed to accelerate the projectile along the barrel. The second problem was speed of operation : how to close the breech before firing and open it after firing as quickly as possible consistent with safety. Two solutions were developed more or less in parallel : The "screw breech" block and "sliding wedge" or "sliding block". At the time of development of the first modern breechloaders in the mid-1800s, gunpowder propellant charges for artillery were typically loaded in cloth bags, which combusted totally on firing. Hence, unlike with a metal rifle cartridge, the breech mechanism itself somehow needed to provide obturation. The early "screw" mechanisms for sealing the breech consisted of threaded blocks which were screwed tightly into the breech after loading, but the threads themselves were insufficient to provide a gas-tight seal. This was further complicated by the need to screw and unscrew the breech as quickly as possible : this was met by the "[[interrupted thread]]" breech block, where the block circumference was alternately threaded and left unthreaded at a slightly smaller diameter to allow the whole block to be fully inserted and rotated a fraction to lock it. Hence if the block circumference was divided into two sets of threads and gaps, the block only needed to be rotated ¼ turn to lock it instead of several turns. The tradeoff was that only ½ the block's circumference was threaded, reducing the security accordingly. The other possibility of sealing the breech was to enclose the propellant charge in a metal cartridge case which expanded on firing and hence sealed the breech, leaving the breech-block merely needing to lock the cartridge case in place. This was more easily accomplished by sliding the block in behind the cartridge case through a vertical or horizontal slot cut through the rear of the breech : the "sliding wedge" or "sliding block" breech. ==Early breechloaders== [[File:Oda_Nobunaga_swivel_breech_loading_gun.jpg|thumb|left|<center>A Japanese swivel breech-loading gun of the time of [[Oda Nobunaga]], 16th century. This gun is thought to have been founded in Portuguese [[Goa]], [[India]]. Caliber: 95mm, length: 2880mm</center>]] The very first cannon of the Middle Ages were breech loaded, with gunpowder and shot contained in pots dropped at the back of the barrel, but the poor seals made them dangerous, and they wore quickly and could not be scaled to larger weapons. Muzzle-loaders were then used until the 19th century. In 1837 [[Martin von Wahrendorff]] patented a breech-loader with a cylindrical breech plug secured by a horizontal wedge; it was adopted by Sweden in 1854. {{clearleft}} ==Armstrong screw breech== [[File:RBL 7 inch Armstrong breech diagram.jpg|thumb|left|Armstrong screw breech]] [[William George Armstrong|Armstrong]] introduced improved designs in the 1850s and 1860s ("[[Armstrong gun]]s" with his "Armstrong screw" breech) which involved loading the shell and propellant cartridge through the hollow breech screw, lowering a heavy block into a slot behind the powder chamber and screwing the breech screw tightly against the block to lock it in place. A degree of obturation was achieved via a cup on the face of the block being forced into a recessed ring on the chamber face. The system was in effect a vertical sliding block such as later used by Krupp in both horizontal and vertical form, with the crucial difference that Armstrong failed to make the progression to loading the powder charge in a metal cartridge, with the result that complete obturation was impossible : whatever obturation that was achieved relied on manual labour rather than the power of the gun's firing, and was hence both uncertain, based on an unsound principle and unsuited to large guns. Armstrong screw-breech guns were initially adopted by the British Army and Royal Navy, but concerns about limited armour penetration of the shells due to limited maximum velocity, safety concerns with the breech blocks blowing out of guns, and higher skill levels demanded of gunners led the British Government to revert to the rifled muzzle-loader in 1870. The Imperial Japanese Army used Armstrong cannon during the [[Boshin War]] to devastate the [[Aizu]] castle town and force its inhabitants to surrender quickly, and British Armstrong light field guns proved deadly against Chinese forces in the [[Second Opium War]]. However, the British Army and Navy preferred to revert to muzzle-loaders until larger high-powered breech-loaders with secure obturation systems that were relatively simple to operate were developed. ==Interrupted screw breech== [[File:Lahitolle canon 95mm 1875-1879 before 1923.jpg|thumb|right|<center>Lahitolle gun and interrupted screw breech</center>]] In the meantime the French persevered with trying to develop breechloaders which combined faster loading than muzzle-loaders, high power, safety and solved the problem of obturation : i.e. how to prevent escape of some propellant gas through the breech to the rear. The [[Lahitolle 95 mm cannon]] of 1875 with an [[interrupted screw]] breech met the first three requirements to a great extent and partially solved the obturation problem. ==de Bange system== [[File:Culasse systeme De Bange before 1923.jpg|thumb|left|<center>de Bange interrupted screw breech</center>]] Finally the [[Charles Ragon de Bange|de Bange]] system introduced in 1877 solved the obturation problem with an asbestos pad impregnated with grease which expanded and sealed the breech on firing. The de Bange system formed the obturation system for all subsequent screw breeches to the present day. Britain adopted the de Bange breech when it returned to breechloaders in the early 1880s after some initial experiments with the inferior "Armstrong cup" obturation system. ==Krupp sliding block== [[File:Krupp sliding block gun Philadelphia 1876.jpg|thumb|right|<center>Krupp horizontal sliding block (left side) breech on large gun exhibited at the Centennial Exhibition, Philadelphia, 1876</center>]] Krupp in Germany during this period (1870s - 1880s) in contrast adopted "Horizontal sliding block" breeches, rather than screw breeches, for all artillery calibres up to 16 inch naval guns. This was similar in some ways to the original "Armstrong screw" : the shell and powder cartridge were inserted through a hollow breech block into the gun bore, and a steel block was slid home into a horizontal slot cut through the breech to close the rear end of the breech. However, unlike Armstrong, Krupp loaded the powder propellant in a metal cartridge case much like a large rifle cartridge, which expanded against the chamber wall on firing and effectively sealed the breech. The sliding block, in both horizontal and vertical forms, and metal cartridge case continued to be the preferred German breech system until after World War II, and is still used by some modern artillery. ==Hotchkiss and Nordenfelt sliding-wedge quickfiring guns== From the mid-1880s Hotchkiss and Nordenfelt introduced 47-mm and 57-mm guns which loaded ammunition as a single cartridge with projectile, cartridge case and primer in a single unit as with modern rifle cartridges. The cartridge case sealed the breech on firing and a vertical sliding wedge (block) locked it in place. These new guns incorporated recoil control devices which facilitated consistency of aim, allowed single-motion loading and fired as soon as the cartridge was inserted and ejected it after firing : hence the name quick-firing. This set a new standard for artillery, and made firing cycles measured in seconds rather than minutes possible. ==Elswick coned interrupted screw== [[File:QF 6 inch gun coned breech screw.jpg|thumb|right|<center>Elswick coned interrupted screw breech of [[QF 6 inch /40 naval gun|QF 6-inch naval gun]]</center>]] Britain enthusiastically adopted the new quickfiring technology, using brass cartridge cases for all calibres up to 6 inches in the late 1880s and early 1890s. However, unlike Krupp and Hotchkiss, British-designed quickfiring ("QF" in British terminology, which became synonymous with charges in metal cartridge cases) continued to use screw breech blocks, but with their function merely to lock the cartridge in place rather than provide obturation. The powerful backward force generated by 6-inch QF guns still required a strongly-seated breech screw with as much thread as possible. However, a basic interrupted-thread screw sufficiently long enough to have enough thread to secure the cartridge on firing still required three separate motions to operate : rotate, withdraw, swing aside after firing, and repeated in reverse before firing. [[Elswick Ordnance Company]] (Armstrong's ordnance arm) developed a coned version of the interrupted-thread screw, with a decreasing rather than constant diameter towards the front. This eliminated the second "withdrawal" motion, with just two motions now necessary : rotate and swing aside. This proved short-lived, with Britain adopting charges in bags using the Welin stepped interrupted screw for all guns 5 inches and up within several years of it becoming available. ==Bofors ogival screw== [[File:Ogival screw.png|thumb|left|<center>Bofors ogival screw</center>]] Also in the early 1890s, Arent Silfversparre of [[Bofors]] invented an ogival screw breech, similar to the Armstrong model in the way it eliminated the need to withdraw the screw before swinging it to the side. Bofors continued to use this in medium artillery into the twentieth century. ==Welin stepped interrupted screw breech== {{main|Welin breech block}} [[File:USN 14 inch railway gun Mk II open breech 1919 LOC 12666.jpg|thumb|right|<center>Welin breech with 4 sets of 3 thread steps</center>]] Britain, France and the United States preferred screw breeches for most calibres, but the major drawback of the de Bange interrupted screw as first implemented was that only half of the circumference of the breech block could be threaded, and hence it needed to be fairly long to achieve safe locking of the breech, which required three separate motions to open after firing : rotate to unscrew, retract the screw and swing to the side. Loading required the 3 operations in reverse. This was hence termed a "three motion block" and was slow to operate. [[Axel Welin]] solved this problem in 1889-1890 with his stepped interrupted screw [[Welin breech block]]. This had threads in sets of steps of increasing diameter so that instead of only half of the screw being threaded, the fraction threaded was '''number of steps / (1 + number of steps)''' : i.e. if the block of a large gun had four steps of threads, 80% of the screw was threaded, allowing a much shorter screw and hence breech block. This allowed the block to be unscrewed and swung out in two motions : the "two motion interrupted screw" breech. Further improvements such as that of Smith-Asbury in 1916 allowed the whole action of unscrewing and swinging aside of the breech screw to be accomplished in a single continuous motion, resulting in the "single-motion interrupted screw breech" still in use today. ==Summary== These rapidly-improving breech systems and the powerful new guns they facilitated led to an [[arms race]] in [[fortification]] and [[ironclad]] warship design that lead to the [[battleship]] class of [[HMS Dreadnought]] and continued until the start of [[World War I]]. ==See also== *[[Armstrong Gun]] ==References== * Royal New Zealand Artillery Association, [http://riv.co.nz/rnza/hist/ord/breech.htm Breech Mechanisms] * W. L. Ruffell, [http://riv.co.nz/rnza/hist/gun/rifled13.htm The Gun - Rifled Ordnance Breech Mechanisms] * Willian F Fullam & Thomas C Hart, USN, [http://www.archive.org/details/textbookordnanc00acadgoog Text-Book of Ordnance and Gunnery. Chapter IV Breech Mechanisms] published by United States Naval Institute, Annapolis MD, 1905 ==External links== [[Category:Artillery by type]] [[ja:アームストロング砲]]'
Whether or not the change was made through a Tor exit node (tor_exit_node)
0
Unix timestamp of change (timestamp)
1275004816